dmesg - Gigabyte AMD Radeon R7
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.3-200.fc21.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC) ) #1 SMP Thu Mar 26 21:39:42 UTC 2015
tseg: 006f000000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000006ccd3fff] usable
BIOS-e820: [mem 0x000000006ccd4000-0x000000006cd03fff] reserved
BIOS-e820: [mem 0x000000006cd04000-0x000000006cfc6fff] usable
BIOS-e820: [mem 0x000000006cfc7000-0x000000006d094fff] ACPI NVS
BIOS-e820: [mem 0x000000006d095000-0x000000006e1c8fff] reserved
BIOS-e820: [mem 0x000000006e1c9000-0x000000006e1c9fff] usable
BIOS-e820: [mem 0x000000006e1ca000-0x000000006e3cffff] ACPI NVS
BIOS-e820: [mem 0x000000006e3d0000-0x000000006e850fff] usable
BIOS-e820: [mem 0x000000006e851000-0x000000006efe1fff] reserved
BIOS-e820: [mem 0x000000006efe2000-0x000000006effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x4455e018-0x4456d657] usable ==> usable
e820: update [mem 0x4453f018-0x4455d457] usable ==> usable
e820: update [mem 0x4452e018-0x4453e857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x000000004452e017] usable
reserve setup_data: [mem 0x000000004452e018-0x000000004453e857] usable
reserve setup_data: [mem 0x000000004453e858-0x000000004453f017] usable
reserve setup_data: [mem 0x000000004453f018-0x000000004455d457] usable
reserve setup_data: [mem 0x000000004455d458-0x000000004455e017] usable
reserve setup_data: [mem 0x000000004455e018-0x000000004456d657] usable
reserve setup_data: [mem 0x000000004456d658-0x000000006ccd3fff] usable
reserve setup_data: [mem 0x000000006ccd4000-0x000000006cd03fff] reserved
reserve setup_data: [mem 0x000000006cd04000-0x000000006cfc6fff] usable
reserve setup_data: [mem 0x000000006cfc7000-0x000000006d094fff] ACPI NVS
reserve setup_data: [mem 0x000000006d095000-0x000000006e1c8fff] reserved
reserve setup_data: [mem 0x000000006e1c9000-0x000000006e1c9fff] usable
reserve setup_data: [mem 0x000000006e1ca000-0x000000006e3cffff] ACPI NVS
reserve setup_data: [mem 0x000000006e3d0000-0x000000006e850fff] usable
reserve setup_data: [mem 0x000000006e851000-0x000000006efe1fff] reserved
reserve setup_data: [mem 0x000000006efe2000-0x000000006effffff] usable
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000044effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x6d04b000 ACPI 2.0=0x6d04b000 SMBIOS=0xf04c0 MPS=0xfd430
efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x0000000000009000) (0MB)
efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000009000-0x000000000003f000) (0MB)
efi: mem03: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
efi: mem06: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001100000) (1MB)
efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001100000-0x0000000002000000) (15MB)
efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000002000000-0x00000000032e7000) (18MB)
efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000032e7000-0x000000003da5e000) (935MB)
efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003da5e000-0x0000000040000000) (37MB)
efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000040000000-0x000000004452e000) (69MB)
efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000004452e000-0x000000005ca46000) (389MB)
efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000005ca46000-0x000000005ca4c000) (0MB)
efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000005ca4c000-0x000000005cc57000) (2MB)
efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000005cc57000-0x000000005cd7e000) (1MB)
efi: mem16: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000005cd7e000-0x00000000610a5000) (67MB)
efi: mem17: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000610a5000-0x00000000610b0000) (0MB)
efi: mem18: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000610b0000-0x00000000610b6000) (0MB)
efi: mem19: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000610b6000-0x0000000061122000) (0MB)
efi: mem20: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000061122000-0x0000000061129000) (0MB)
efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000061129000-0x0000000061376000) (2MB)
efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000061376000-0x0000000061378000) (0MB)
efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000061378000-0x0000000061379000) (0MB)
efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000061379000-0x000000006137b000) (0MB)
efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006137b000-0x000000006b17d000) (158MB)
efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006b17d000-0x000000006b180000) (0MB)
efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006b180000-0x000000006b18b000) (0MB)
efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006b18b000-0x000000006b18e000) (0MB)
efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006b18e000-0x000000006b197000) (0MB)
efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006b197000-0x000000006b19a000) (0MB)
efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006b19a000-0x000000006b1a3000) (0MB)
efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006b1a3000-0x000000006b1a6000) (0MB)
efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006b1a6000-0x000000006c43c000) (18MB)
efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006c43c000-0x000000006c94e000) (5MB)
efi: mem35: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000006c94e000-0x000000006ccd4000) (3MB)
efi: mem36: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000006ccd4000-0x000000006ccee000) (0MB)
efi: mem37: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000006ccee000-0x000000006cd04000) (0MB)
efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000006cd04000-0x000000006cfc7000) (2MB)
efi: mem39: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000006cfc7000-0x000000006d062000) (0MB)
efi: mem40: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000006d062000-0x000000006d068000) (0MB)
efi: mem41: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000006d068000-0x000000006d095000) (0MB)
efi: mem42: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006d095000-0x000000006de75000) (13MB)
efi: mem43: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006de75000-0x000000006dea1000) (0MB)
efi: mem44: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006dea1000-0x000000006dea3000) (0MB)
efi: mem45: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006dea3000-0x000000006e0cd000) (2MB)
efi: mem46: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006e0cd000-0x000000006e0cf000) (0MB)
efi: mem47: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006e0cf000-0x000000006e18c000) (0MB)
efi: mem48: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000006e18c000-0x000000006e198000) (0MB)
efi: mem49: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000006e198000-0x000000006e1c9000) (0MB)
efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e1c9000-0x000000006e1ca000) (0MB)
efi: mem51: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000006e1ca000-0x000000006e3d0000) (2MB)
efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e3d0000-0x000000006e539000) (1MB)
efi: mem53: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000006e539000-0x000000006e80d000) (2MB)
efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e80d000-0x000000006e80e000) (0MB)
efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000006e80e000-0x000000006e810000) (0MB)
efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e810000-0x000000006e832000) (0MB)
efi: mem57: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000006e832000-0x000000006e84c000) (0MB)
efi: mem58: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e84c000-0x000000006e84d000) (0MB)
efi: mem59: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000006e84d000-0x000000006e84f000) (0MB)
efi: mem60: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006e84f000-0x000000006e851000) (0MB)
efi: mem61: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000006e851000-0x000000006efe2000) (7MB)
efi: mem62: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000006efe2000-0x000000006f000000) (0MB)
efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000044f000000) (13552MB)
efi: mem64: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec01000-0x00000000fec02000) (0MB)
efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec10000-0x00000000fec11000) (0MB)
efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed01000) (0MB)
efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed80000-0x00000000fed81000) (0MB)
efi: mem69: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed81000-0x00000000fed90000) (0MB)
efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A88XM-HD3, BIOS F7 07/09/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x44f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000070000000 mask FFFFF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000044f000000 aka 17648M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0x70000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x6f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd700-0x000fd70f] mapped at [ffff8800000fd700]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x03038000, 0x03038fff] PGTABLE
BRK [0x03039000, 0x03039fff] PGTABLE
BRK [0x0303a000, 0x0303afff] PGTABLE
init_memory_mapping: [mem 0x44ee00000-0x44effffff]
[mem 0x44ee00000-0x44effffff] page 2M
BRK [0x0303b000, 0x0303bfff] PGTABLE
init_memory_mapping: [mem 0x440000000-0x44edfffff]
[mem 0x440000000-0x44edfffff] page 2M
init_memory_mapping: [mem 0x420000000-0x43fffffff]
[mem 0x420000000-0x43fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x6ccd3fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x6cbfffff] page 2M
[mem 0x6cc00000-0x6ccd3fff] page 4k
init_memory_mapping: [mem 0x6cd04000-0x6cfc6fff]
[mem 0x6cd04000-0x6cfc6fff] page 4k
BRK [0x0303c000, 0x0303cfff] PGTABLE
init_memory_mapping: [mem 0x6e1c9000-0x6e1c9fff]
[mem 0x6e1c9000-0x6e1c9fff] page 4k
BRK [0x0303d000, 0x0303dfff] PGTABLE
init_memory_mapping: [mem 0x6e3d0000-0x6e850fff]
[mem 0x6e3d0000-0x6e3fffff] page 4k
[mem 0x6e400000-0x6e7fffff] page 2M
[mem 0x6e800000-0x6e850fff] page 4k
init_memory_mapping: [mem 0x6efe2000-0x6effffff]
[mem 0x6efe2000-0x6effffff] page 4k
init_memory_mapping: [mem 0x100000000-0x41fffffff]
[mem 0x100000000-0x41fffffff] page 1G
RAMDISK: [mem 0x3da5e000-0x3ed13fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000006D04B000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000006D04B088 00008C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000006D051348 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20141107/tbfadt-649)
ACPI: DSDT 0x000000006D04B1A8 0061A0 (v02 ALASKA A M I 00000088 INTL 20051117)
ACPI: FACS 0x000000006D08A080 000040
ACPI: APIC 0x000000006D051458 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000006D0514D8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000006D051520 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x000000006D051560 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: WDRT 0x000000006D051598 000047 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: BGRT 0x000000006D0515E0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000006D051618 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D0521B8 00033B (v02 AMD BANTRY 00000002 MSFT 04000000)
ACPI: CRAT 0x000000006D0524F8 0005A0 (v01 AMD BANTRY 00000001 AMD 00000001)
ACPI: SSDT 0x000000006D052A98 001457 (v01 AMD CPMDFIGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D053EF0 000852 (v01 AMD CPMDFDGP 00000001 INTL 20051117)
ACPI: SSDT 0x000000006D054748 00122C (v01 AMD CPMCMN 00000001 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044effffff]
NODE_DATA(0) allocated [mem 0x44efe7000-0x44effafff]
[ffffea0000000000-ffffea00113fffff] PMD -> [ffff88043f600000-ffff88044e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x44effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009ffff]
node 0: [mem 0x00100000-0x6ccd3fff]
node 0: [mem 0x6cd04000-0x6cfc6fff]
node 0: [mem 0x6e1c9000-0x6e1c9fff]
node 0: [mem 0x6e3d0000-0x6e850fff]
node 0: [mem 0x6efe2000-0x6effffff]
node 0: [mem 0x100000000-0x44effffff]
Initmem setup node 0 [mem 0x00001000-0x44effffff]
On node 0 totalpages: 3916758
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 6929 pages used for memmap
DMA32 zone: 443447 pages, LIFO batch:31
Normal zone: 54208 pages used for memmap
Normal zone: 3469312 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x4452e000-0x4452efff]
PM: Registered nosave memory: [mem 0x4453e000-0x4453efff]
PM: Registered nosave memory: [mem 0x4453f000-0x4453ffff]
PM: Registered nosave memory: [mem 0x4455d000-0x4455dfff]
PM: Registered nosave memory: [mem 0x4455e000-0x4455efff]
PM: Registered nosave memory: [mem 0x4456d000-0x4456dfff]
PM: Registered nosave memory: [mem 0x6ccd4000-0x6cd03fff]
PM: Registered nosave memory: [mem 0x6cfc7000-0x6d094fff]
PM: Registered nosave memory: [mem 0x6d095000-0x6e1c8fff]
PM: Registered nosave memory: [mem 0x6e1ca000-0x6e3cffff]
PM: Registered nosave memory: [mem 0x6e851000-0x6efe1fff]
PM: Registered nosave memory: [mem 0x6f000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x6f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88044ec00000 s87936 r8192 d30848 u524288
pcpu-alloc: s87936 r8192 d30848 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3855533
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 15126096K/15667032K available (7655K kernel code, 1243K rwdata, 3304K rodata, 1504K init, 1532K bss, 540936K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:65792 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3693.289 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.57 BogoMIPS (lpj=3693289)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eb0000 - ffffffff81eb7000)
ftrace: allocating 27696 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-7850K Radeon R7, 12 Compute Cores 4C+8G (fam: 15, model: 30, stepping: 01)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29546.31 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x6cfc7000-0x6d094fff] (843776 bytes)
PM: Registering ACPI NVS region [mem 0x6e1ca000-0x6e3cffff] (2121728 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 13:17:39, date: 04/04/15
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff]
pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
pci 0000:00:01.0: [1002:130f] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb71000-0xfeb717ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb70000-0xfeb70fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb6f000-0xfeb6f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb6e000-0xfeb6efff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb6d000-0xfeb6d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb6c000-0xfeb6cfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:03:06.0: [1814:0601] type 00 class 0x028000
pci 0000:03:06.0: reg 0x10: [mem 0xfe800000-0xfe80ffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=mem,locks=none
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x4452e018-0x47ffffff]
e820: reserve RAM buffer [mem 0x4453f018-0x47ffffff]
e820: reserve RAM buffer [mem 0x4455e018-0x47ffffff]
e820: reserve RAM buffer [mem 0x6ccd4000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6cfc7000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e1ca000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6e851000-0x6fffffff]
e820: reserve RAM buffer [mem 0x6f000000-0x6fffffff]
e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x70000000-0xafffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0220-0x0227] has been reserved
system 00:03: [io 0x0228-0x0237] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: [io 0x040b] has been reserved
system 00:0a: [io 0x04d6] has been reserved
system 00:0a: [io 0x0c00-0x0c01] has been reserved
system 00:0a: [io 0x0c14] has been reserved
system 00:0a: [io 0x0c50-0x0c51] has been reserved
system 00:0a: [io 0x0c52] has been reserved
system 00:0a: [io 0x0c6c] has been reserved
system 00:0a: [io 0x0c6f] has been reserved
system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
system 00:0a: [io 0x0800-0x089f] could not be reserved
system 00:0a: [io 0x0b20-0x0b3f] has been reserved
system 00:0a: [io 0x0900-0x090f] has been reserved
system 00:0a: [io 0x0910-0x091f] has been reserved
system 00:0a: [io 0xfe00-0xfefe] has been reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:0a: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.1: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:03: resource 10 [mem 0xb0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19160K (ffff88003da5e000 - ffff88003ed14000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x5d0a5000-0x610a5000] (64MB) mapped at [ffff88005d0a5000-ffff8800610a4fff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06003104
microcode: CPU1: patch_level=0x06003104
microcode: CPU2: patch_level=0x06003104
microcode: CPU3: patch_level=0x06003104
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1428153459.391:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.1: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c80000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71280 irq 26
ata5: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71300 irq 26
ata6: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71380 irq 26
ata7: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71400 irq 26
ata8: SATA max UDMA/133 abar m2048@0xfeb71000 port 0xfeb71480 irq 26
libphy: Fixed MDIO Bus: probed
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.3-200.fc21.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.3-200.fc21.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.3-200.fc21.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.3-200.fc21.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:10.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6f000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.19.3-200.fc21.x86_64 ehci_hcd
usb usb5: SerialNumber: 0000:00:12.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6d000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.19.3-200.fc21.x86_64 ehci_hcd
usb usb6: SerialNumber: 0000:00:13.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb70000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.19.3-200.fc21.x86_64 ohci_hcd
usb usb7: SerialNumber: 0000:00:12.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6e000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 3.19.3-200.fc21.x86_64 ohci_hcd
usb usb8: SerialNumber: 0000:00:13.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb6c000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 3.19.3-200.fc21.x86_64 ohci_hcd
usb usb9: SerialNumber: 0000:00:14.5
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:08: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
EFI Variables Facility v0.08 2004-May-17
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 8c30fda75077eedae9696fef6fe1ab1bb08fcea8'
registered taskstats version 1
Magic number: 11:384:280
tty tty17: hash matches
rtc_cmos 00:08: setting system clock to 2015-04-04 13:17:39 UTC (1428153459)
PM: Hibernation image not present or could not be loaded.
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5.00: ATA-9: ADATA SP600, 2.5, max UDMA/100
ata5.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/100
ata4.00: ATA-8: WDC WD5000AAKX-08ERMA0, 19.01H19, max UDMA/100
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/100
ata3.00: ATA-8: KINGSTON SV300S37A120G, 580ABBF0, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 1H19 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA ADATA SP600 2.5 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sda: sda1 sda2 sda3 sda4 sda5
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 2:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1504K (ffffffff81d38000 - ffffffff81eb0000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 524K (ffff88000277d000 - ffff880002800000)
Freeing unused kernel memory: 792K (ffff880002b3a000 - ffff880002c00000)
random: systemd urandom read with 16 bits of entropy available
usb 7-5: new full-speed USB device number 2 using ohci-pci
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc900018c0000, fc:aa:14:0d:cd:79, XID 0c000800 IRQ 38
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb 7-5: New USB device found, idVendor=04e6, idProduct=e001
usb 7-5: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 7-5: Product: SCRx31 USB Smart Card Reader
usb 7-5: Manufacturer: SCM Microsystems Inc.
usb 7-5: SerialNumber: 60505DED
r8169 0000:02:00.0 enp2s0: renamed from eth0
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
checking generic (c0000000 300000) vs hw (b0000000 10000000)
radeon 0000:00:01.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (KAVERI 0x1002:0x130F 0x1458:0xD000).
[drm] register mmio base: 0xFEB00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xD0000000
[drm] doorbell mmio size: 8388608
usb 8-4: new full-speed USB device number 2 using ohci-pci
ATOM BIOS: 113
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 7670118 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000000078C000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880437ab8c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880437ab8c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880437ab8c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880437ab8c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880437ab8c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900125b6c98
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880437ab8c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880437ab8c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 8-4: New USB device found, idVendor=056a, idProduct=0026
usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-4: Product: Intuos5 touch S
usb 8-4: Manufacturer: Wacom Co.,Ltd.
tsc: Refined TSC clocksource calibration: 3693.175 MHz
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
Switched to clocksource tsc
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY3
[drm] CRT1: NUTMEG
[drm] fb mappable at 0xB0990000
[drm] vram apper at 0xB0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
checking generic (c0000000 300000) vs hw (b0000000 10000000)
radeon 0000:00:01.0: fb1: radeondrmfb frame buffer device
radeon 0000:00:01.0: registered panic notifier
ACPI Error: [\_SB_.ALIB] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATC0] (Node ffff88043f0b6d48), AE_NOT_FOUND (20141107/psparse-536)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATCS] (Node ffff88043f0b6d20), AE_NOT_FOUND (20141107/psparse-536)
[drm] Initialized radeon 2.40.0 20080528 for 0000:00:01.0 on minor 0
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1462:0x277C).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
vga_switcheroo: enabled
ATPX version 1, functions 0x00000000
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: 113
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading tahiti Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1022:1425 = 733d03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff8804370bbc00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff8804370bbc04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff8804370bbc08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff8804370bbc0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff8804370bbc10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90012eb5a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-2
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xC0479000
[drm] vram apper at 0xC0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 1
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[161]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1428153463.085:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 105090 rules.
SELinux: 2048 avtab hash slots, 105090 rules.
SELinux: 8 users, 103 roles, 4991 types, 294 bools, 1 sens, 1024 cats
SELinux: 83 classes, 105090 rules
SELinux: Permission audit_read in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev nsfs, type nsfs), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev aio, type aio), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
SELinux: initialized (dev efivarfs, type efivarfs), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev sda4, type ext4), uses xattr
audit: type=1403 audit(1428153463.191:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 112.702ms.
systemd[1]: Relabelled /dev and /run in 18.489ms.
systemd-readahead[416]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
EXT4-fs (sda4): re-mounted. Opts: (null)
systemd-journald[421]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
acpi-cpufreq: overriding BIOS provided _PSD data
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:02: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:04: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/LNXVIDEO:01/input/input6
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: dig-out=0x11/0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Rear Mic=0x18
sound hdaudioC1D0: Front Mic=0x19
sound hdaudioC1D0: Line=0x1a
sound hdaudioC1D0: CD=0x1c
random: nonblocking pool is initialized
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
Adding 7208956k swap on /dev/sda3. Priority:-1 extents:1 across:7208956k SSFS
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input8
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input9
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input11
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.1/0000:01:00.1/sound/card2/input13
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
SELinux: initialized (dev sdb1, type ext4), uses xattr
usb 8-1: new full-speed USB device number 3 using ohci-pci
cfg80211: Calling CRDA to update world regulatory domain
alg: No test for crc32 (crc32-pclmul)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
ppdev: user-space parallel port driver
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda5, type ext4), uses xattr
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
rt2800pci 0000:03:06.0: enabling device (0000 -> 0002)
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2860, rev 0103 detected
usb 8-1: New USB device found, idVendor=0781, idProduct=0002
usb 8-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 8-1: Product: ImageMate CompactFlash USB
usb 8-1: Manufacturer: SanDisk Corporation
usb 8-1: SerialNumber: 000000000003
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0002 detected
usb-storage 8-1:1.0: USB Mass Storage device detected
usb-storage 8-1:1.0: Quirks match for vid 0781 pid 0002: 10
scsi host8: usb-storage 8-1:1.0
usbcore: registered new interface driver usb-storage
input: Wacom Intuos5 touch S Pen as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.0/0003:056A:0026.0001/input/input18
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
input: Wacom Intuos5 touch S Pad as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.0/0003:056A:0026.0001/input/input19
wacom 0003:056A:0026.0001: hidraw0: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:13.0-4/input0
usbcore: registered new interface driver uas
rt2800pci 0000:03:06.0 wlp3s6: renamed from wlan0
input: Wacom Intuos5 touch S Finger as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.1/0003:056A:0026.0002/input/input20
wacom 0003:056A:0026.0002: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos5 touch S] on usb-0000:00:13.0-4/input1
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
audit: type=1305 audit(1428153464.372:4): audit_pid=614 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
r8169 0000:02:00.0 enp2s0: link down
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.34
scsi 8:0:0:0: Direct-Access SanDisk ImageMate II 1.30 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdd] Attached SCSI removable disk
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: device changed decodes: PCI:0000:00:01.0,olddecodes=io+mem,decodes=none:owns=mem
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 186
Raw EDID:
00 ff ff ff ff ff ff 00 04 72 cb 00 cd c6 80 00
08 14 01 03 80 34 1d 78 ea de 95 a3 54 4c 99 26
0f 50 54 bb 8c 10 b3 3f ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[drm:radeon_dvi_detect [radeon]] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
wlp3s6: authenticate with 60:fe:20:5a:ba:9a
wlp3s6: send auth to 60:fe:20:5a:ba:9a (try 1/3)
wlp3s6: authenticated
wlp3s6: associate with 60:fe:20:5a:ba:9a (try 1/3)
wlp3s6: RX AssocResp from 60:fe:20:5a:ba:9a (capab=0x411 status=0 aid=4)
wlp3s6: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
Adjusting tsc more than 11% (2533492 vs 2521232)
usb 8-5: new low-speed USB device number 4 using ohci-pci
usb 8-5: New USB device found, idVendor=047b, idProduct=0011
usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-5: Product: Standard USB Keyboard
usb 8-5: Manufacturer: Silitek
input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-5/8-5:1.0/0003:047B:0011.0003/input/input22
hid-generic 0003:047B:0011.0003: input,hidraw2: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:13.0-5/input0
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
fuse init (API version 7.23)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs